Shaanxi FORUS Petroleum Machinery Equipment Co., Ltd
Keep promises,quality assurance!
Add to Cart
37 1/2 inch Rotary Table Anti Slip Mat Yellow Colour 2200MM*1800MM Mat For Drilling Rig
1. Brief introduction of turntable and platform anti-skid pad:
Anti-skid pad for drilling rig turntable and platform is a non-slip pad made of polyurethane material for drilling rig turntable and platform used in oil field, mining and engineering construction. This new type of anti-skid pad has a more significant anti-skid protection effect than the existing checkered steel plate, wood board or checkered rubber sheet for the anti-skid surface of the drilling rig turntable.
Usually drilling platforms and turntables are skid-proof with protruding particles on the surface of steel plates or rubber plates. The protruding particles have a low height. When there is oil or water pollution on the surface, the oil and water pollution cannot be discharged from the surface in time, and the anti-skid effect is poor and not safe enough.
The anti-skid pad system for drilling rig turntable platform adopts polyurethane plate as the main plate. Polyurethane rubber is the most wear-resistant rubber among rubbers. It has the characteristics of high strength, good elasticity, oil and solvent resistance, good low temperature performance and good aging resistance. The surface has a plurality of vertical and horizontal drainage grooves, and in the square area enclosed by the drainage grooves on the upper surface of the main body pad, there are a combination of protruding rubber particles and metal nails embedded in the protruding surface of the main body part. Protruding rubber particles and metal rivets are regularly staggered, highlighting the height of rubber particles and metal rivets
The height of the nails protruding from the upper surface of the pad can not only effectively prevent slipping, but also allow the operator to stand on the pad without discomfort.
Since the surface of the anti-skid pad has vertical and horizontal drainage grooves, oil or water can flow into the grooves and be discharged in time, reducing the influence of oil or water on the anti-skid effect. The metal rivets protruding from a certain height and the polyurethane rubber protruding rubber particles with better wear resistance make the utility model have excellent anti-skid performance and long service life, and the elastic rubber plate or resin plate anti-skid pad can also be used. It can effectively reduce the damage to the rotary table and the drilling tool during the operation of the drilling rig. Therefore, this polyurethane anti-skid pad is a kind of anti-skid pad that has excellent anti-skid performance in the case of oil or water pollution, and can drain oil and water pollution for drilling rig turntables and platforms in oil field, mining and engineering construction.
The anti-skid pad of the drilling rig platform is a polyurethane anti-skid pad spread around the turntable of the drilling rig platform and the middle aisle of the two drill pipe boxes.
3. Turntable anti-skid pad installation:
Spread the large and small main body pads ①② on the turntable and use the I-shaped insert pads ③ to connect the main rest pads as a whole and then use. During the installation and use of the anti-skid pad, avoid bumping, falling and other objects colliding and pressing against the anti-skid pad. to prevent damage
Iron nails and glue nails on the surface of the anti-skid pad affect the anti-skid effect.
Specific Parameter
| Material | Polyurethane rubber | Model | 37 1/2 inch |
| No. | Item | Value | |
| 1 | Shore hardness | 90±2 | |
| 2 | 100% Stress at definite elongation | 5.8Mpa | |
| 3 | 300% Stress at definite elongation | 10.6Mpa | |
| 4 | Tensile Strength | 47Mpa | |
| 5 | Elongation at break | 580 | |
| 6 | Tear Strength (right angle) | 98(KN/M) | |
| 7 | Tear Strength (pants type) | 39(KN/M | |
| 8 | Springback | 36% | |
| 9 | Density | 1.27(g/cm³) | |
| 10 | DIN Abrasion | 50 mm³ | |
